Integrated Fuzzy DEA-ANFIS to Measure the Success Effect of Human Resource Spirituality

Workplace spirituality has gained attention as it is proven to be a contributor to organizational performance improvement. This paper aims to assess the impact of human resource spirituality on the success of organizational strategic change projects. The success of the projects is measured by the well-known criterion of deviation from the planned budget cost. Data collection is based on a questionnaire survey of 252 personnel in 36 large and medium-scale organizational change projects in power industry. The paper proposes an integrated algorithm of fuzzy data envelopment analysis (FDEA) and adaptive network-based fuzzy inference system (ANFIS) for measuring the pure effect of human resource spirituality on the success of organizational change projects in the power industry. It also achieves a verified tool capable of addressing complexity, nonlinearity, ambiguity, and fuzziness for measuring spirituality of human resources in the projects. Results show that spirituality of the project team has a significant effect on project success.     

Effect of Iron sulfate as electrolyte additive on plasma electrolytic oxidation of aluminum alloy

This study has been carried out to investigate the incorporation of Iron(II) sulfate as an additive of electrolyte on formed AA1010 aluminum alloy, using plasma electrolytic oxidation method in silicate-based electrolytes containing Iron(II) sulfate. In order to fabricate nanocomposite coating, silicon nitride nanopowder was added to electrolyte. The effects of iron(II) sulfate additive on the voltage-time trend, microstructure, compositions, wear, and corrosion resistances of PEO coatings were investigated. In addition, current density and concentration of additive were studied as parameters that were effective on coating. Results showed that although FeSO₄ enters to the coating structure, but it does not develop a new phase. The corrosion and wear behavior of coated samples with FeSO₄ indicate an improvement as compared to those without additive.     

Available and Waiting Times for Cognitive Radios

Cognitive radios (CRs) have been recently proposed for the problem of spectrum scarcity. The principle of CRs?? operation is based on the opportunistic access to the frequency spectrum mainly dedicated to primary users (PUs). The statistical time pattern of PUs?? channel usage and arrival can affect the usability of specific frequency bands for CRs. In this note, the effect of the arrival rate and channel holding time of PUs on the available times for CRs is analyzed. To this end, first, based on Poissonian arrivals, the available time for CRs is calculated. Then, assuming a gamma distribution for the inter-arrival times and a uniform distribution of channel holding time of PU in these intervals, the probability density function and moments of the available time for CRs are derived. Next, the effect of PUs statistical parameters on the average number of packets and the average symbol rate that a CR can transmit is analyzed. Also, taking that CR needs at least T seconds, the average waiting time is calculated.     

Features of the time evolution of localized quantum states in graphene

In the Heisenberg representation, the phenomena of the interference of quantum states of the conduction and valence bands of graphene, arising for localized electron wave packets are analyzed. The interference leads to temporal oscillations in the values of the average physical quantities.     

Cylindrical functionally graded shell model based on the first order shear deformation nonlocal strain gradient elasticity theory

Microsystem Technologies - In this article, a cylindrical functionally graded shell model is developed in the framework of nonlocal strain gradient theory for the first time. For this purpose, the...     

Hot Corrosion Behavior and Microstructural Change of Al-Gradient CoNiCrAlYSi Coatings, Produced by LVPS and Diffusional Processes

Conventional and gradient CoNiCrAlYSi coatings were produced by using low vacuum plasma spray and an additional step of diffusional over aluminizing (pack cementation) techniques on an Inconel-738 substrate. Hot corrosion of these coatings was investigated using Na₂SO₄–20wt%NaVO₃ molten salt at 880?°C for 800?h. Hot corrosion rate was determined by measuring the weight gain of the specimens at regular intervals for a duration of 20?h. X-ray diffraction, field emission scanning electron microscopy and electron probe micro analysis techniques were used to determine the nature of phases, investigation of the thermally grown oxide, examination of the surface attack and determination of the elemental distribution. The gradient coating showed better performance by re-healing alumina scale due to its possession of more β phase as Al reservoir. Results indicated that pack cementation process caused an increase in amount of aluminum-rich β phase and better hot corrosion properties of gradient coatings owing to the Al enrichment in the outer layer and rapid formation of protective oxide on the surface.     

Isogeometric level set topology optimization for elastoplastic plane stress problems

International Journal of Mechanics and Materials in Design - This article aims to utilize IsoGeometric analysis (IGA) and Level set method for topology optimization of elastoplastic plane stress...     

Simple,fast, and accurate parametric modeling of the coupling and external quality factor for microstrip filter design using active learning method

In the realization step of any microstrip filter according to the required electrical characteristics, coupling factors and external quality factor (Q_ext) are related to the physical parameters of the structure using time consuming full wave simulations. This paper presents a simple, fast, and accurate parametric model of the coupling between the coupled square open loop resonators (SOLRs) and Q_ext of these resonators versus physical parameters of the structure and substrate characteristics utilizing active learning method (ALM). In the modeling process the multi-dimensional functions of coupling factor and Q_ext are broken down into their simpler aspects, their behaviors are extracted and then final model will be constructed by combining these simpler aspects. ALM allows the overall model for coupling factor and Q_ext to be developed through the use of small number of initial data. Once the modeling process is completed it provides a fast and accurate prediction of the required physical parameters for a given coupling factor and Q_ext. Using the constructed model for a distinct SOLR, which its accuracy was validated by comparison with the full wave simulation results a filter was designed and fabricated. Good agreement between measured and simulated response confirms the accuracy of the modeling procedure.     

Reservoir volume optimization and performance evaluation of rooftop catchment systems in arid regions: A case study of Birjand,Iran

This study evaluated the performance of rooftop catchment systems in securing non-potable water supply in Birjand, located in an arid area in southeastern Iran. The rooftop catchment systems at seven study sites of different residential buildings were simulated for dry, normal, and wet water years, using 31-year rainfall records. The trial and error approach and mass diagram method were employed to optimize the volume of reservoirs in five different operation scenarios. Results showed that, during the dry water year from 2000 to 2001, for reservoirs with volumes of 200–20000 L, the proportion of days that could be secured for non-portable water supply was on average computed to be 16.4%–32.6% across all study sites. During the normal water year from 2009 to 2010 and the wet water year from 1995 to 1996, for reservoirs with volumes of 200–20000 L, the proportions were 20.8%–69.6% and 26.8%–80.3%, respectively. Therefore, a rooftop catchment system showed a high potential to meet a significant portion of non-potable water demand in the Birjand climatic region. Reservoir volume optimization using the mass diagram method produced results consistent with those obtained with the trial and error approach, except at sites #1, #2, and #5. At these sites, the trial and error approach performed better than the mass diagram method due to relatively high water consumption. It is concluded that the rooftop catchment system is applicable under the same climatic conditions as the study area, and it can be used as a drought mitigation strategy as well.